|
|
| |
DAVID W. SPITZER'S E-ZINE
|
TECHNICAL AND MARKETING SERVICES
FOR INSTRUMENTATION SUPPLIERS AND END-USERS
|
|
|
|
|
|
Nevertheless, like any other flowmeter, full-bore magnetic flowmeters aren't magical, and there are quite a few ways to install and operate one that will give you the worst results. Here are some don'ts for installing and operating magnetic flowmeters. These are general guidelines and one should consult with the manufacturer to discuss the particular operating parameters of a given meter. In other words, these aren't written in stone - talk to your vendor!
click for more...
|
|
|
|
The overall efficiency of a pump system can be defined as the ratio of the hydraulic output of the pump to the electrical energy input to its motor. It can be used to help identify opportunities for potential energy savings, process improvement and maintenance planning.
click for more...
|
|
|
|
What is the efficiency of a pump system that pumps 100 gallons per minute of water at a pressure of 100 feet of water column using a 7.5 horsepower motor?
click for more...
|
| |
|
ABOUT SPITZER AND BOYES, LLC
|
|
In addition to over 35 years of experience as an instrument user, consultant, and expert witness, David W Spitzer has written over 10 books and 250 articles about flow measurement, level measurement, instrumentation, and process control. David (with Walt Boyes) is the author of seven Consumer Guides to various industrial flow and level technologies. David teaches his flow measurement seminars in both English and Portuguese.
Spitzer and Boyes, LLC provides engineering, technical writing, training seminars, strategic marketing consulting, distribution consulting, and expert witness services worldwide, and can be contacted at +1.845.623.1830 or www.spitzerandboyes.com.
|
|
ISSN 1538-5280
©2018 Spitzer and Boyes, LLC
The content of this message is protected by copyright and trademark laws under U.S. and international law. All rights reserved.
|
