Spitzer and Boyes, LLC Website

DAVID W. SPITZER'S E-ZINE

TECHNICAL AND MARKETING SERVICES
FOR INSTRUMENTATION SUPPLIERS AND END-USERS

This issue sponsored by Industrial Automation INSIDER

August 2017

Just Calibrate It! (Clamp-on Flowmeter)

Another way to "check" the calibration is to use a clamp-on ultrasonic flowmeter. Now, remember that in order to use one flowmeter as a secondary standard to calibrate another, in situ, you need a flowmeter that is at least one order of magnitude more accurate than the one you are calibrating. click for more...

Flowmeters Downstream of Pumps

Pumping liquid from one location in the process to one other location in the process is a common hydraulic configuration encountered in processing systems. click for more...

Required Pump Pressure

Approximately how much pressure head must a pump located at grade produce to pump water to a tank located 20 meters above grade? click for more...

ABOUT SPITZER AND BOYES, LLC

In addition to over 35 years of experience as an instrument user, consultant, and expert witness, David W Spitzer has written over 10 books and 250 articles about flow measurement, level measurement, instrumentation, and process control. David (with Walt Boyes) is the author of seven Consumer Guides to various industrial flow and level technologies. David teaches his flow measurement seminars in both English and Portuguese.

Spitzer and Boyes, LLC publishes the Industrial Automation INSIDER that is an independent subscription newsletter for industrial automation and process control system users, installers and suppliers world-wide, giving a monthly update on the continuing evolution, development and convergence of automation technologies.

Spitzer and Boyes, LLC provides engineering, technical writing, training seminars, strategic marketing consulting, distribution consulting, and expert witness services worldwide, and can be contacted at +1.845.623.1830 or www.spitzerandboyes.com.