|
|
DAVID W. SPITZER'S E-ZINE
|
TECHNICAL AND MARKETING SERVICES FOR INSTRUMENTATION SUPPLIERS AND END-USERS
|
|
|
Variation in certain characteristics of ultrasonic flowmeters has allowed this technology to be applied to many processes. The following sections define flowmeter design categories and how they fit the needs of their intended applications.
click for more...
|
|
A differential pressure flow measurement system consists of a differential pressure primary flow element and a differential pressure flow transmitter. When the flow of a fluid in a pipe passes a restriction in the piping system, the pressure in the piping system is reduced. Most differential pressure primary flow elements are designed, constructed and operated in a manner such that the flow rate is proportional to the square root of the pressure drop across the restriction. These differential pressure primary flow elements include orifice plates, Venturi tubes, elbows, flow nozzles, low loss flow tubes, single-port and multiple-port Pitot tubes, segmental wedge and V-Cone flowmeters.
click for more...
|
|
In defining flowmeter performance, all accuracy statements are not equal. Understanding the terminology and knowing how to convert between different accuracy statements is crucial to making a balanced comparison.
click for more...
|
|
|
YOUR FEEDBACK
|
We value your comments and suggestions. Please vist our contact page to send us an email.
Unless otherwise noted, receipt of your e-mail constitutes
permission to include its contents (or parts thereof) in the E-zine.
|
ABOUT SPITZER AND BOYES, LLC
|
Spitzer and Boyes, LLC sells
Consumer Guides for end-users that contain detailed product information
and analysis about:
We also offer seminars
on these topics at various locations across the United States
|
To be removed from this e-zine mailing list, please click here.
ISSN 1538-5280 ©2010 Spitzer and Boyes, LLC
The content of this message is protected by copyright and trademark laws under U.S. and international law. All rights reserved.
|